Technical specifications

P1 system
technical information.

Product performance, coverage rates, application requirements and system specifications in one place.

Stockist information

Technical specifications at a glance.

P1 is engineered to perform across a broad range of conditions and substrates. The system is designed with working installers in mind — every specification reflects real-world application, not laboratory ideals.

System specification

Core product details, coverage, cure times, storage and performance data.

Specification	Detail
Resin type	Flexible hybrid polymer (UPE 250)
Available colours	Light Grey and Dark Grey (standard)
Reinforcement	225gsm chopped strand matting (EB 225 CSM) with 50mm overlaps / option for 450gsm
First coat coverage — smooth	0.9 – 1.2 litres/m²
First coat coverage — rough	1.2 – 1.7 litres/m²
Second coat coverage	0.5 litres/m²
Unit size	15 litre (covers approximately 10–15 m² per unit)
Cure time (normal conditions)	30–60 minutes minimum before overcoating
Maximum overcoating window	7 days (acetone wipe and sand required beyond this)
Application temperature range	1°C to 30°C (accelerator required below 5°C)
Substrate temperature	1°C to 40°C
Maximum relative humidity	85% (surface must be at least 3°C above dew point)
Rain proof	10–20 minutes after application
Shelf life	12 months from manufacture (unopened, stored correctly)
Storage temperature	0°C to 25°C, out of direct sunlight
Fire classification	BROOF(t4) — unrestricted use under national requirements
Guarantee	20-year product guarantee; workmanship guarantee via approved installers

Catalyst quick reference

Catalyst dosage is temperature-dependent. Always perform a test mix in prevailing conditions before starting application.

Temperature range	Catalyst rate	Scoops per litre	Accelerator
1°C – 4°C	4%	4 scoops	Essential
5°C – 9°C	4%	4 scoops	Recommended
10°C – 14°C	3%	3 scoops	Not required
15°C – 19°C	3%	3 scoops	Not required
20°C – 24°C	2%	2 scoops	Not required
25°C – 30°C	2%	2 scoops	Inhibitor optional

Important: Never use fewer than 2 scoops per litre in hot conditions, and never more than 4 scoops per litre in cold conditions. Accelerator must be fully mixed into resin before catalyst is added — they must never come into direct contact with each other.

Primer selector

Choosing the correct primer is straightforward. If your substrate is not listed or you are unsure, carry out an adhesion test before proceeding.